Lubricated rotary screw compressor

FINI K-MAX 38-08

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow
233 cfm7.5 bar (≈ 109 psig)
Power
50 hp37 kW
Type
Fixed speed
Manufacturer
FINI
Line
K-MAX / K-MAX PM 18.5-90 kW
Stages
1
Cooling
Air
Voltage
n/a
Frequency
n/a
Brochure market
Europe / international
CSA
n/a
CRN
n/a

Published flow by pressure

PressureFlowIn m³/min
7.5 bar (≈ 109 psig) 233 cfm ≈ 6.6 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

DesignationPart no.ConfigurationVoltage
K-MAX 38-08 V60DU92FNMA60 n/a n/a
K-MAX 38-08 ES V60DU92FNMB60 with dryer n/a

Comparable models

Compare side by side
ModelFlowAt pressure PowerMarket
ABAC FORMULA M37 7,5 ≈ 233.1 cfm 7.5 bar (≈ 109 psig) 50 hp Europe / international
Chicago Pneumatic CPD 50 G 223 cfm 0.8 MPa (≈ 116 psig) 50 hp Europe / international
Gardner Denver L37 233.7 acfm 110 psig (≈ 7.6 bar) 50 hp Worldwide
ELGi EG 37 235 cfm 8 bar (≈ 116 psig) 50 hp Worldwide
Hertz Kompressoren HSC 37 ≈ 229.5 cfm 7.5 bar (≈ 109 psig) 50 hp Worldwide
Kaeser BSD 50 237 cfm 125 psig (≈ 8.6 bar) 50 hp North America
Atlas Copco GA 37 228 cfm 125 psig (≈ 8.6 bar) 50 hp Worldwide
Sullair 3700B 227 cfm 125 psig (≈ 8.6 bar) 50 hp North America

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other K-MAX / K-MAX PM 18.5-90 kW models

Is your product missing?