Lubricated rotary screw compressor

FINI CUBE 4.0-10

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 16.2 cfm10 bar (≈ 145 psig)
Power: 5.5 hp4 kW
Type: Fixed speed
Manufacturer: FINI
Line: CUBE 4-7.5 kW
Stages: 1
Cooling: Air
Voltage: 400 V 3ph
Frequency: 50 Hz
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
10 bar (≈ 145 psig)	16.2 cfm	≈ 0.46 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
CUBE 4.0-10	V51PD92FNM443	n/a	400 V 3ph
CUBE 4.0-10 ES	V51PD92FNM543	with dryer	400 V 3ph
CUBE 4.0-10-270	V91PD92FNM201	Tank-mounted 270 L	400 V 3ph
CUBE 4.0-10-270 ES	V91PD92FNM301	Tank-mounted 270 L, with dryer	400 V 3ph
CUBE 4.0-10-270 Z	V91PD92FNM401	Tank-mounted 270 L	400 V 3ph
CUBE 4.0-10-270 ES Z	V91PD92FNM501	Tank-mounted 270 L, with dryer	400 V 3ph

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Chicago Pneumatic CPM 5.5	18 cfm	1 MPa (≈ 145 psig)	5.5 hp	Europe / international
ABAC SPINN4 10	≈ 18.2 cfm	10 bar (≈ 145 psig)	5.5 hp	Europe / international
Sullair ST410	16 cfm	150 psig (≈ 10.3 bar)	5 hp	North America
Quincy QGS-5	16.8 cfm	145 psig (≈ 10 bar)	5 hp	North America
Kaeser SXC 6	≈ 17 cfm	10 bar (≈ 145 psig)	≈ 5 hp	Worldwide
Champion D6	15.3 cfm	145 psig (≈ 10 bar)	5 hp	North America
Hertz Kompressoren HGS 4	≈ 13.1 cfm	10 bar (≈ 145 psig)	5.5 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other CUBE 4-7.5 kW models

Is your product missing?