Lubricated rotary screw compressor
ABAC FORMULA 5,5 10
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 24.7 cfm10 bar (≈ 145 psig)
- Power
- 7.5 hp5.5 kW
- Type
- Fixed speed
- Manufacturer
- ABAC
- Stages
- 1
- Cooling
- Air
- Voltage
- 400 V 3ph
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 10 bar (≈ 145 psig) | ≈ 24.7 cfm | ≈ 0.7 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| FINI CUBE 5.5-10 | 24.9 cfm | 10 bar (≈ 145 psig) | 7.5 hp | Europe / international |
| Chicago Pneumatic CPM 7.5 | 24 cfm | 1 MPa (≈ 145 psig) | 7.5 hp | Europe / international |
| Quincy QGS-7.5 | 25.3 cfm | 145 psig (≈ 10 bar) | 7.5 hp | North America |
| Sullair ST510 | 25.3 cfm | 150 psig (≈ 10.3 bar) | 7.5 hp | North America |
| Kaeser SX 8 | ≈ 24 cfm | 10 bar (≈ 145 psig) | ≈ 7 hp | Worldwide |
| Champion D7.5 | 28 cfm | 145 psig (≈ 10 bar) | 7.5 hp | North America |
| Hertz Kompressoren HGS 5,5 | ≈ 19.8 cfm | 10 bar (≈ 145 psig) | 7.5 hp | Worldwide |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other FORMULA FS 5.5-11 kW models
Is your product missing?
Request received. We will proceed within 72 hours.