Image may differ from the actual product. Refrigerated dryer · Purestream Purestream AHT
AHT 200UE
Refrigerated dryer for hot inlet air (up to 99 °C), with built-in pre-filter / moisture separator as standard and two Bekomat zero-loss drains. 20 to 350 SCFM. Ideal directly downstream of a compressor without an aftercooler.
$11,204 CAD, before taxes. Installation and shipping extra. The quote prevails.
Recommended in-line filters
Built-in 3-micron pre-filter / separator as standard — no X1 coalescing pre-filter needed at the (hot) inlet (high-temperature dryer: hot air is cooled then filtered inside).
* “Oil-free” air: residual oil ≤ 0.003 mg/m³ (oil vapour) — ISO 8573-1 oil class 1, per the AC carbon filter specification.
Filters sized for this dryer. Uncheck or adjust on the quote page. View filters
- Water separatorat compressor
- Dryer
- XAAfter-filter
- ACCarbon
- Dry, clean air
- Water separator — at the compressor — removes bulk liquid water right at the compressor outlet. A separate component from the dryer, required upstream (often already in place). View water separators →
- 3-micron pre-filter — built into the dryer (standard) — high-temperature dryer: the hot air is first cooled (built-in aftercooler) then filtered to 3 micron inside. No external X1 coalescing pre-filter at the inlet — coalescing does not work on hot air.
- XA after-filter — after the dryer (optional) — captures fine oil droplets (0.01 µm) for very clean outlet air.
- AC carbon filter — after (optional) — removes oil vapours and odours: “oil-free” air. Add when needed — rarely required.
Model specifications
- Reference
- AHT 200UE
- Flow
- 200 SCFM
- Voltage
- 230/1/60
- Refrigerant
- R404A
- Connection
- 1 1/2" NPT
- Weight
- 165 lb · 75 kg
- Controller
- DMC 14
- Certification
- cETLus
Dimensions
| A | B | C | |
|---|---|---|---|
| in | 22 | 23.35 | 55.12 |
| mm | 559 | 593 | 1400 |
Letters (A, B, C…) refer to the dimensional drawing (manufacturer drawing).
Range specifications
- Dew point
- High temperature
- Drain
- 2 × Bekomat — purgeur sans perte d'air
- Nominal conditions
- ambient 38 °C (100 °F) · inlet 82 °C (180 °F) · 100 psig · PDP NaN °C (NaN °F)
- Max. conditions
- ambient 46 °C (115 °F) · inlet 99 °C (210 °F) · 174 psig
- CRN (legal mention)
- to be confirmed
The CRN (pressure vessel) is confirmed before publication.
Videos
DMC 14 controllerAHT range controller
Manufacturer demos and guides (CAG Technologies YouTube channel). Videos play right here, without leaving the site — the player only loads on click.
Ready to request a quote?
Add this model to your request, then send it all at once from the quote page. Fast response, billing by transfer or purchase order — no online payment.