Image may differ from the actual product. Refrigerated dryer · Purestream Purestream ACT
ACT250UQ
Continuous-cycle refrigerated dryer built around the ALU-DRY aluminium heat exchanger: a single vertical module combines the air/air exchanger (it pre-cools the incoming air to cut the required cooling power, then reheats the outgoing air to prevent condensation on downstream piping), the counter-flow air/refrigerant exchanger and a high-efficiency demister-type condensate separator. Vertical arrangement — condensate flows to the Bekomat zero-loss electronic drain; low pressure drop. Nominal 3 °C pressure dew point. 20 to 5000 SCFM, NPT (≤500 SCFM) or 150# flange (≥600 SCFM) connection.
$11,283 CAD, before taxes. Installation and shipping extra. The quote prevails.
Recommended in-line filters
* “Oil-free” air: residual oil ≤ 0.003 mg/m³ (oil vapour) — ISO 8573-1 oil class 1, per the AC carbon filter specification.
Filters sized for this dryer. Uncheck or adjust on the quote page. View filters
- Water separatorat compressor
- X1Pre-filter
- Dryer
- XAAfter-filter
- ACCarbon
- Dry, clean air
- Water separator — at the compressor — removes bulk liquid water right at the compressor outlet. A separate component from the dryer, required upstream (often already in place). View water separators →
- X1 pre-filter — before the dryer — stops liquid water, dust and oil aerosols. Protects the dryer’s heat exchanger.
- XA after-filter — after the dryer — captures fine oil droplets (0.01 µm) for very clean outlet air.
- AC carbon filter — after (optional) — removes oil vapours and odours: “oil-free” air. Add when needed — rarely required.
Model specifications
- Reference
- ACT250UQ
- Flow
- 250 SCFM
- Voltage
- 575/3/60
- Refrigerant
- R134a
- Connection
- 1 1/2" NPT
- Weight
- 139 lb · 63 kg
- Controller
- DMC 14 (contrôleur électronique, interrupteur on/off)
- Certification
- cETLus
Dimensions
| A | B | C | D | E | |
|---|---|---|---|---|---|
| in | 21.9 | 22.8 | 34.8 | 5.4 | 31.5 |
| mm | 556 | 579 | 884 | 137 | 800 |
Letters (A, B, C…) refer to the dimensional drawing (manufacturer drawing).
Range specifications
- Dew point
- 3 °C (37 °F)
- Heat exchanger
- ALU-DRY (aluminium)
- Drain
- Bekomat — purgeur électronique sans perte d'air
- Nominal conditions
- ambient 37.8 °C (100 °F) · inlet 37.8 °C (100 °F) · 7 barg (100 psig) · PDP 3 °C (37 °F)
- Max. conditions
- ambient 50 °C (122 °F) · inlet 70 °C (158 °F) · 14 barg — 16 barg for ACT20 to ACT50
- CRN (legal mention)
- to be confirmed
The CRN (pressure vessel) is confirmed before publication.
Videos
Manufacturer demos and guides (CAG Technologies YouTube channel). Videos play right here, without leaving the site — the player only loads on click.
Ready to request a quote?
Add this model to your request, then send it all at once from the quote page. Fast response, billing by transfer or purchase order — no online payment.