Refrigerated dryer · Purestream ACT
Purestream ACT refrigerated air dryer Replaced by FCT
Continuous-cycle refrigerated dryer built around the ALU-DRY aluminium heat exchanger: a single vertical module combines the air/air exchanger (it pre-cools the incoming air to cut the required cooling power, then reheats the outgoing air to prevent condensation on downstream piping), the counter-flow air/refrigerant exchanger and a high-efficiency demister-type condensate separator. Vertical arrangement: condensate flows to the Bekomat zero-loss electronic drain; low pressure drop. Nominal 3 °C pressure dew point. 20 to 5000 SCFM, NPT (≤500 SCFM) or 150# flange (≥600 SCFM) connection.
From $2,244 CAD, before taxes. Installation and shipping extra. Price subject to change without notice.
- Flow
- 20–5000 SCFM
- Dew point
- 3 °C (37 °F)
- Models
- 35
Image may differ from the actual product. Which model for your installation?
Rated flow is given at reference conditions (100 psig · 38 °C). Enter your actual conditions: the calculator applies the correction factors and shows the rated flow to aim for.
Reference charts
| psig | 60 | 80 | 100 | 120 | 140 | 160 | 180 | 203 |
|---|---|---|---|---|---|---|---|---|
| barg | 4.1 | 5.5 | 6.9 | 8.3 | 9.7 | 11 | 12.4 | 14 |
| Factor | × 0.79 | × 0.91 | × 1.00nominal | × 1.07 | × 1.13 | × 1.18 | × 1.23 | × 1.27 |
Outside the 60–203 psig range: contact us.
| °C | 27 | 32 | 35 | 38 | 40 | 43 | 45 | 50 |
|---|---|---|---|---|---|---|---|---|
| °F | 80.6 | 89.6 | 95 | 100.4 | 104 | 109.4 | 113 | 122 |
| Factor | × 1.11 | × 1.09 | × 1.06 | × 1.00nominal | × 0.94 | × 0.87 | × 0.78 | × 0.69 |
Outside the 27–50 °C range: contact us.
| °C | 32 | 38 | 43 | 50 | 55 | 60 | 65 | 70 |
|---|---|---|---|---|---|---|---|---|
| °F | 89.6 | 100.4 | 109.4 | 122 | 131 | 140 | 149 | 158 |
| Factor | × 1.16 | × 1.00nominal | × 0.82 | × 0.68 | × 0.61 | × 0.52 | × 0.45 | × 0.40 |
Outside the 32–70 °C range: contact us.
Corrected capacity = rated flow × F(pressure) × F(ambient temperature) × F(inlet temperature). Aim for the model whose corrected rated flow ≥ your need. Source: manufacturer datasheets (Friulair / CAG).
35 models · 20–5000 SCFM
CAD list prices, before taxes. The model from the calculator is highlighted. Above 1500 SCFM, 150# flange connection.
35 models shown
| Model | Flow | Voltage | Refrig. | Conn. | Weight | Price | |
|---|---|---|---|---|---|---|---|
| ACT20UP See FCT | 20 SCFM | 115/1/60 | R134a | 1/2" NPT | 64 lb29 kg | $2,244 | |
| ACT30UP See FCT | 30 SCFM | 115/1/60 | R134a | 1/2" NPT | 68 lb31 kg | $2,402 | |
| ACT50UP See FCT | 50 SCFM | 115/1/60 | R134a | 1/2" NPT | 71 lb32 kg | $3,204 | |
| ACT75UP See FCT | 75 SCFM | 115/1/60 | R134a | 1" NPT | 79 lb36 kg | $3,967 | |
| ACT100UP See FCT | 100 SCFM | 115/1/60 | R134a | 1 1/4" NPT | 101 lb46 kg | $4,423 | |
| ACT100UE non cETLus See FCT | 100 SCFM | 230/1/60 | R134a | 1 1/4" NPT | 101 lb46 kg | $4,423 | |
| ACT125UP See FCT | 125 SCFM | 115/1/60 | R407C | 1 1/4" NPT | 106 lb48 kg | $5,184 | |
| ACT125UE See FCT | 125 SCFM | 230/1/60 | R407C | 1 1/4" NPT | 106 lb48 kg | $5,184 | |
| ACT150UP See FCT | 150 SCFM | 115/1/60 | R407C | 1 1/4" NPT | 110 lb50 kg | $5,948 | |
| ACT150UE See FCT | 150 SCFM | 230/1/60 | R407C | 1 1/4" NPT | 110 lb50 kg | $5,948 | |
| ACT200UP See FCT | 200 SCFM | 115/1/60 | R407C | 1 1/2" NPT | 121 lb55 kg | $8,539 | |
| ACT200UE See FCT | 200 SCFM | 230/1/60 | R407C | 1 1/2" NPT | 121 lb55 kg | $8,539 | |
| ACT200UQ See FCT | 200 SCFM | 575/3/60 | R134a | 1 1/2" NPT | 121 lb55 kg | $10,549 | |
| ACT250UE See FCT | 250 SCFM | 230/1/60 | R407C | 1 1/2" NPT | 139 lb63 kg | $9,454 | |
| ACT250UQ See FCT | 250 SCFM | 575/3/60 | R134a | 1 1/2" NPT | 139 lb63 kg | $11,283 | |
| ACT300UE See FCT | 300 SCFM | 230/1/60 | R407C | 2" NPT | 227 lb103 kg | $12,807 | |
| ACT300UQ See FCT | 300 SCFM | 575/3/60 | R134a | 2" NPT | 227 lb103 kg | $13,721 | |
| ACT350UE See FCT | 350 SCFM | 230/1/60 | R407C | 2" NPT | 236 lb107 kg | $13,263 | |
| ACT350UQ See FCT | 350 SCFM | 575/3/60 | R134a | 2" NPT | 236 lb107 kg | $14,180 | |
| ACT400UE See FCT | 400 SCFM | 230/1/60 | R407C | 2 1/2" NPT | 331 lb150 kg | $14,727 | |
| ACT400UQ See FCT | 400 SCFM | 575/3/60 | R407C | 2 1/2" NPT | 331 lb150 kg | $15,702 | |
| ACT500UE See FCT | 500 SCFM | 230/1/60 | R407C | 2 1/2" NPT | 375 lb170 kg | $15,992 | |
| ACT500UQ See FCT | 500 SCFM | 575/3/60 | R407C | 2 1/2" NPT | 375 lb170 kg | $17,129 | |
| ACT600UQ See FCT | 600 SCFM | 575/3/60 | R407C | 3" 150# FL. | 529 lb240 kg | $20,970 | |
| ACT800UQ See FCT | 800 SCFM | 575/3/60 | R407C | 3" 150# FL. | 534 lb242 kg | on request | |
| ACT1000UQ See FCT | 1000 SCFM | 575/3/60 | R407C | 3" 150# FL. | 606 lb275 kg | on request | |
| ACT1250UQ See FCT | 1250 SCFM | 575/3/60 | R407C | 3" 150# FL. | 686 lb311 kg | on request | |
| ACT1500UQ See FCT | 1500 SCFM | 575/3/60 | R407C | 4" 150# FL. | 1168 lb530 kg | on request | |
| ACT1750UQ See FCT | 1750 SCFM | 575/3/60 | R407C | 4" 150# FL. | 1283 lb582 kg | on request | |
| ACT2000UQ See FCT | 2000 SCFM | 575/3/60 | R407C | 4" 150# FL. | 1312 lb595 kg | on request | |
| ACT2500UQ See FCT | 2500 SCFM | 575/3/60 | R407C | 4" 150# FL. | 1567 lb711 kg | on request | |
| ACT3000UQ See FCT | 3000 SCFM | 575/3/60 | R407C | 6" 150# FL. | 2000 lb907 kg | on request | |
| ACT3750UQ See FCT | 3750 SCFM | 575/3/60 | R407C | 6" 150# FL. | 2070 lb939 kg | on request | |
| ACT4000UQ See FCT | 4000 SCFM | 575/3/60 | R407C | 8" 150# FL. | 2469 lb1120 kg | on request | |
| ACT5000UQ See FCT | 5000 SCFM | 575/3/60 | R407C | 8" 150# FL. | 3090 lb1402 kg | on request | |
Recommended in-line filters
When checked, they are added to the quote with each dryer at the right size (sized per model). Adjust or remove on the quote page. Above 1500 SCFM: on request.
* “Oil-free” air: residual oil ≤ 0.003 mg/m³ (oil vapour) (ISO 8573-1 oil class 1), per the AC carbon filter specification.
- Water separatorat compressor
- X1Pre-filter
- Dryer
- XAAfter-filter
- ACCarbon
- Dry, clean air
- Water separator: at the compressor : removes bulk liquid water right at the compressor outlet. A separate component from the dryer, required upstream (often already in place). View water separators →
- X1 pre-filter: before the dryer : stops liquid water, dust and oil aerosols. Protects the dryer’s heat exchanger.
- XA after-filter: after the dryer : captures fine oil droplets (0.01 µm) for very clean outlet air.
- AC carbon filter: after (optional) : removes oil vapours and odours: “oil-free” air. Add when needed, rarely required.
Range specifications
- Dew point
- 3 °C (37 °F)
- Heat exchanger
- ALU-DRY (aluminium)
- Drain
- Bekomat (purgeur électronique sans perte d'air)
- Controller
- DMC 14 (contrôleur électronique, interrupteur on/off) · DMC 20 (microprocesseur, sectionneur principal)
- Refrigerant(s)
- R134a · R407C
- Nominal conditions
- ambient 37.8 °C (100 °F) · inlet 37.8 °C (100 °F) · 7 barg (100 psig) · PDP 3 °C (37 °F)
- Max. conditions
- ambient 50 °C (122 °F) · inlet 70 °C (158 °F) · 14 barg : 16 barg for ACT20 to ACT50
- Certification (CRN)
- to be confirmed
The CRN (pressure vessel) is a legal mention: confirmed before publication.
Videos
Manufacturer demos and guides (CAG Technologies YouTube channel). Videos play right here, without leaving the site: the player only loads on click.
View my quote request
Add the models you need to your request, then send it all at once from the quote page. Fast response, billing by transfer or purchase order, no online payment.
View my quote request