Desiccant dryer
Sullivan-Palatek SPDP 400
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 400 SCFM≈ 680 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- Sullivan-Palatek
- Voltage
- 120 VAC 50-60 Hz
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- cULus (controller)
- CRN
- yes (vessels ASME/CRN)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HLD-0400-1 | 400 SCFM≈ 680 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCe 400 | 400 SCFM≈ 680 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHL400 | 400 SCFM678 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-400 | 400 SCFM≈ 680 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL400 | 400 SCFM678 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Hertz Kompressoren HDA 680 | 400 SCFM678 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Ingersoll Rand HL400 | 400 SCFM678 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mikropor MDA 680 | 400 SCFM680 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPDP Pro Heatless models
Is your product missing?
Request received. We will proceed within 72 hours.