Desiccant dryer
Sullivan-Palatek SPDP 200
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 200 SCFM≈ 340 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- Sullivan-Palatek
- Voltage
- 120 VAC 50-60 Hz
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- North America
- CSA
- cULus (controller)
- CRN
- yes (vessels ASME/CRN)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-200 E | 200 SCFM≈ 340 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-0200-1 | 200 SCFM≈ 340 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCe 200 | 200 SCFM≈ 340 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHL200 | 200 SCFM342 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-200 | 200 SCFM≈ 340 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL200 | 200 SCFM342 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL200 | 200 SCFM342 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 200 | 200 SCFM≈ 340 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPDP Pro Heatless models
Is your product missing?
Request received. We will proceed within 72 hours.