Desiccant dryer
Sullivan-Palatek SPDHR 3200
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 3,200 SCFM≈ 5,437 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- Sullivan-Palatek
- Voltage
- 460 VAC/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- cUL (controls)
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Deltech RP-3200 | 3,200 SCFM≈ 5,437 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD3200 | 3,200 SCFM5,437 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Kaeser KED 3200 | 3,200 SCFM≈ 5,437 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| BEKO Technologies ACH 3250 | 3,250 SCFM≈ 5,522 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Mattei MEH 3100 | 3,100 SCFM≈ 5,267 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Atlas Copco AD 1600 | 3,392 SCFM5,760 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| Altec AIR HRE-3000-4 | 3,000 SCFM≈ 5,097 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP3000 | 3,000 SCFM5,094 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPDHR Premium Heated Purge models
Is your product missing?
Request received. We will proceed within 72 hours.