Desiccant dryer
Sullivan-Palatek SPDHR 250
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 250 SCFM≈ 425 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- Sullivan-Palatek
- Voltage
- 120 VAC/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- cUL (controls)
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-0250-4 | 250 SCFM≈ 425 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP250 | 250 SCFM426 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-250 | 250 SCFM≈ 425 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Ingersoll Rand EH250 | 250 SCFM426 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Mattei MEH 250 | 250 SCFM≈ 425 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification EH 0250 | 250 SCFM≈ 425 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| BEKO Technologies ACH 260 | 260 SCFM≈ 442 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Hankison HPD300 | 300 SCFM510 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPDHR Premium Heated Purge models
Is your product missing?
Request received. We will proceed within 72 hours.