Desiccant dryer
Quincy QHP-850
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 850 SCFM≈ 1,444 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- Quincy
- Line
- QHP
- Conditions
- @100 psig
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei MEH 850 | 850 SCFM≈ 1,444 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Nano Purification EH 400 | ≈ 848 SCFM1,440 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Altec AIR HRE-0800-4 | 800 SCFM≈ 1,359 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP800 | 800 SCFM1,362 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-900 | 900 SCFM≈ 1,529 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD900 | 900 SCFM1,529 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Ingersoll Rand EH800 | 800 SCFM1,362 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KED 900 | 900 SCFM≈ 1,529 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other QHP models
Is your product missing?
Request received. We will proceed within 72 hours.