Desiccant dryer
Quincy QHP-1050
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,050 SCFM≈ 1,784 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- Quincy
- Line
- QHP
- Conditions
- @100 psig
- Voltage
- 460/3/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Deltech RP-1050 | 1,050 SCFM≈ 1,784 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD1050 | 1,050 SCFM1,784 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Kaeser KED 1050 | 1,050 SCFM≈ 1,784 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Atlas Copco AD 480 | 1,018 SCFM1,728 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Worldwide |
| BEKO Technologies ACH 1010 | 1,010 SCFM≈ 1,716 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Altec AIR HRE-1000-4 | 1,000 SCFM≈ 1,699 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP1000 | 1,000 SCFM1,698 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Ingersoll Rand EH1000 | 1,000 SCFM1,698 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other QHP models
Is your product missing?
Request received. We will proceed within 72 hours.