Desiccant dryer
Pneumatic Products (SPX) 240DHA
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 240 SCFM≈ 408 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- Pneumatic Products (SPX)
- Line
- DHA Heat-Les
- Conditions
- @100 psig, -40 °F
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mikropor MMD240 | 240 SCFM400 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Parker MX102C | 240 SCFM408 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Sullair DMD-240 | 240 SCFM≈ 408 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
| OMI HLA 400 | 235 SCFM400 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Atlas Copco CD 110+ | 233 SCFM396 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Aircel AHLD-250 E | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HOF-0250-1 | 250 SCFM≈ 425 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| BEKO Technologies XCe 250 | 250 SCFM≈ 425 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DHA Heat-Les models
Is your product missing?
Request received. We will proceed within 72 hours.