Desiccant dryer
OMI HLA 400
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 235 SCFM400 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C/-40 °F (optional -70 °C/-100 °F)
- ISO 8573-1 class
- Class 1 to 2
- Type
- Heatless
- Manufacturer
- OMI
- Line
- HLA
- Conditions
- FAD 20 °C, 1 bar
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Atlas Copco CD 110+ | 233 SCFM396 m³/h | -70 °C (-94 °F) | Class 1 | Worldwide |
| Mikropor MMD240 | 240 SCFM400 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Parker MX102C | 240 SCFM408 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Quincy QHD-230 | 230 SCFM≈ 391 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Sullair DMD-240 | 240 SCFM≈ 408 m³/h | -73 to -20 °C (-99.4 to -4 °F) | Classes 1, 2, 3 (derived) | North America |
| Pneumatech PH 230 HE | ≈ 227 SCFM385 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Aircel AHLD-250 E | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR MHR250 | 250 SCFM≈ 425 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HLA models
Is your product missing?
Request received. We will proceed within 72 hours.