Desiccant dryer
Mikropor MDA 1500
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 800 SCFM1,500 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C (optional -70 °C)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- Mikropor
- Line
- MDA
- Conditions
- reference 35 °C, 7 bar
- Voltage
- 230/1/50-60
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HLD-0800-1 | 800 SCFM≈ 1,359 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| BEKO Technologies XCp 800 | 800 SCFM≈ 1,359 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Champion XCHL800 | 800 SCFM1,362 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Gardner Denver XGHL800 | 800 SCFM1,362 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL800 | 800 SCFM1,362 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 800 | 800 SCFM≈ 1,359 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Sullivan-Palatek SPDPR 800 | 800 SCFM≈ 1,359 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Van Air Systems HL-800 | 800 SCFM1,286 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other MDA models
Is your product missing?
Request received. We will proceed within 72 hours.