Desiccant dryer
Ingersoll Rand EH300
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 300 SCFM510 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C/-40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heated purge
- Manufacturer
- Ingersoll Rand
- Line
- EH
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- North America
- CSA
- panel UL/ULC
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Altec AIR HRE-0300-4 | 300 SCFM≈ 510 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Champion XCHP300 | 300 SCFM510 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Deltech RP-300 | 300 SCFM≈ 510 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Hankison HPD300 | 300 SCFM510 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | North America |
| Kaeser KED 300 | 300 SCFM≈ 510 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 (derived) | North America |
| Sullivan-Palatek SPDH 300 | 300 SCFM≈ 510 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| BEKO Technologies ACH 260 | 260 SCFM≈ 442 m³/h | -62.2 to -40 °C (-80 to -40 °F) | Class 2 (derived) | North America |
| Mattei MEH 250 | 250 SCFM≈ 425 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other EH models
Is your product missing?
Request received. We will proceed within 72 hours.