Refrigerated dryer
Ingersoll Rand D25IN-A
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 12 SCFM20 m³/h
- Dew point
- 3 to 7 °C (37.4 to 44.6 °F)As published: <3 °C (class 4) / <7 °C (class 5)
- ISO 8573-1 class
- Class 4 to 5
- Type
- Non-cycling
- Manufacturer
- Ingersoll Rand
- Line
- D-IN / D-ITD-IN (EU 50 Hz)
- Voltage
- 230/1/50
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Donaldson Buran DC 0020 AB | ≈ 12 SCFM20 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Europe / international |
| Hertz Kompressoren HRD 10 | 12 SCFM21 m³/h | n/a | Class 4 | Europe / international |
| ALUP ADQ 21 | 12.4 SCFM21 m³/h | 4 °C (39.2 °F) | Class 4 | Europe / international |
| OMI ED 18 | 11 SCFM18 m³/h | 3 °C (37.4 °F) | Class 4 | Europe / international |
| Mikropor MKE-23 | ≈ 14 SCFM23 m³/h | n/a | Class 4 | Europe / international |
| FINI R-DRY 4 | 14 SCFM24 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Europe / international |
| BEKO Technologies DRYPOINT RA III 20 AC | ≈ 12 SCFM21 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| Worthington Creyssensac DW 2 | 12.4 SCFM21 m³/h | 4 °C (39.2 °F) | Class 4 | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other D-IN / D-IT models
Is your product missing?
Request received. We will proceed within 72 hours.