Desiccant dryer
Atlas Copco XD 850+
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,802 SCFM3,060 m³/h
- Dew point
- n/a
- ISO 8573-1 class
- n/a
- Type
- Heat of compression (HOC)
- Manufacturer
- Atlas Copco
- Line
- XD+
- Conditions
- FAD 7 bar(e)/100 psig
- Voltage
- n/a
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Ingersoll Rand HC-21 | 1,880 SCFM3,023 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| BEKO Technologies HOC 1700 | 1,700 SCFM≈ 2,888 m³/h | -40 °C (-40 °F) | Class 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other XD+ models
Is your product missing?
Request received. We will proceed within 72 hours.