Refrigerated dryer
Atlas Copco FX 40
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 83 SCFM140.4 m³/h
- Dew point
- 3 °C (37.4 °F)As published: +3 °C / 37.4 °F
- ISO 8573-1 class
- Class 4 (derived)
- Type
- Non-cycling
- Manufacturer
- Atlas Copco
- Line
- FD / FD VSD / FXFX 5-300
- Voltage
- 230/1/50; 115-230/1/60
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Worthington Creyssensac DW 13 | 83 SCFM141 m³/h | 4 °C (39.2 °F) | Class 4 | Worldwide |
| BEKO Technologies DRYPOINT RA III 135 AC | ≈ 81 SCFM138 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| Mattei MD 25 | 88.3 SCFM150 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| Altec AIR RAD-0075A | 75 SCFM≈ 127 m³/h | n/a | Class 4 to 5 | North America |
| Purestream (Friulair) FCT75UP | 75 SCFM≈ 127 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | North America |
| Sullair SRN-75 | 75 SCFM≈ 127 m³/h | 2.8 to 7.2 °C (37 to 45 °F) | Class 4 to 5 | North America |
| Sullivan-Palatek SPRPN 75 | 75 SCFM≈ 127 m³/h | n/a | Class 4 to 5 | North America |
| BOGE DS 26-2 | ≈ 92 SCFM156 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other FD / FD VSD / FX models
Is your product missing?
Request received. We will proceed within 72 hours.