Refrigerated dryer
Atlas Copco FX 20
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 1,766 SCFM2,998.8 m³/h
- Dew point
- 3 to 5 °C (37.4 to 41 °F)As published: +3 °C / 37 °F (values); +5 °C / 41 °F also published
- ISO 8573-1 class
- Class 4 to 5 (derived)
- Type
- Non-cycling
- Manufacturer
- Atlas Copco
- Line
- FX 1-21FX 1-21 (former line)
- Voltage
- 400/3/50; 460/3/60
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Worthington Creyssensac DW 300 | 1,766 SCFM3,000 m³/h | 4 °C (39.2 °F) | Class 4 | Worldwide |
| BEKO Technologies DRYPOINT RA III 3000 AC | ≈ 1,766 SCFM3,000 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| Purestream (Friulair) FCT1750UQ | 1,750 SCFM≈ 2,973 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | North America |
| Sullivan-Palatek SPRPRN 1750 | 1,750 SCFM≈ 2,973 m³/h | n/a | Class 4 to 5 | North America |
| Mattei MD 480 | 1,694.9 SCFM2,880 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| Sullair SRN-1600 | 1,600 SCFM≈ 2,718 m³/h | 2.8 to 7.2 °C (37 to 45 °F) | Class 4 to 5 | North America |
| Altec AIR RAD-2000A-M | 2,000 SCFM≈ 3,398 m³/h | n/a | Class 4 to 5 | North America |
| ALUP ADQ 3000 | 1,766 SCFM3,000 m³/h | 4 °C (39.2 °F) | Class 4 | Europe / international |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other FX 1-21 models
Is your product missing?
Request received. We will proceed within 72 hours.