Desiccant dryer
ALUP AD 60
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 35 SCFM59 m³/h
- Dew point
- -70 to -40 °C (-94 to -40 °F)As published: -40 °C std (-70 °C with derating)
- ISO 8573-1 class
- Class 1 to 2 (derived)
- Type
- Heatless
- Manufacturer
- ALUP
- Line
- AD 7-60
- Conditions
- 7 bar, PDP -40 °C
- Voltage
- 12-24 VDC / 100-115-230 VAC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| MTA NA107 | ≈ 35 SCFM59 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Worthington Creyssensac DB 6 C | ≈ 35 SCFM59 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| MARK ADS 10 | 34.7 SCFM59 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Mattei DD 60 | 34 SCFM60 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Donaldson Ultrapac 2000 0065 | ≈ 38 SCFM65 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Ultrafilter HL 50 | ≈ 29 SCFM50 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 3 (derived) | Europe / international |
| FINI HDT 12 | 42 SCFM72 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| BEKO Technologies ACC 35 | 35 SCFM≈ 59 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other AD 7-60 models
Is your product missing?
Request received. We will proceed within 72 hours.