Desiccant dryer
Altec AIR HRL-2500-1
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 2,500 SCFM≈ 4,248 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/C (class 2)
- ISO 8573-1 class
- Class 2
- Type
- Heatless
- Manufacturer
- Altec AIR
- Line
- HRL
- Voltage
- 120/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-2500 E | 2,500 SCFM≈ 4,248 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Mattei MHL 2500 | 2,500 SCFM≈ 4,248 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 4400 | 2,500 SCFM4,400 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification HL 2500 | 2,500 SCFM≈ 4,248 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 2 | North America |
| Hertz Kompressoren HDA 4400 | 2,590 SCFM4,398 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Chicago Pneumatic CPAD-2600 | 2,600 SCFM≈ 4,417 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Sullair SA2600 | 2,600 SCFM≈ 4,417 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Quincy QHD-2300 | 2,331 SCFM≈ 3,960 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HRL models
Is your product missing?
Request received. We will proceed within 72 hours.