Desiccant dryer
Altec AIR HOF-0200-1
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- 200 SCFM≈ 340 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °F/C (class 2)
- ISO 8573-1 class
- Class 2
- Type
- Heatless
- Manufacturer
- Altec AIR
- Line
- HOF oil field
- Voltage
- 120/1/60
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- yes (HOF-0100 to 0800)
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Aircel AHLD-200 E | 200 SCFM≈ 340 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| BEKO Technologies XCe 200 | 200 SCFM≈ 340 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHL200 | 200 SCFM342 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-200 | 200 SCFM≈ 340 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Gardner Denver XGHL200 | 200 SCFM342 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Ingersoll Rand HL200 | 200 SCFM342 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | North America |
| Mattei MHL 200 | 200 SCFM≈ 340 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| Mikropor MDA 300 | 200 SCFM300 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other HOF oil field models
Is your product missing?
Request received. We will proceed within 72 hours.