Lubricated rotary screw compressor
Sullair 1800V (60 Hz)
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 116 cfm100 psig (≈ 6.9 bar)
- Power
- 25 hp18 kW
- Type
- Variable speed (VSD)
- Manufacturer
- Sullair
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 100 psig (≈ 6.9 bar) | 116 cfm | ≈ 3.28 m³/min |
| 125 psig (≈ 8.6 bar) | 105 cfm | ≈ 2.97 m³/min |
| 150 psig (≈ 10.3 bar) | 96 cfm | ≈ 2.72 m³/min |
| 175 psig (≈ 12.1 bar) | 87 cfm | ≈ 2.46 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Chicago Pneumatic CPVSp 25 | ≈ 20.5 to 123.7 cfm | 7 bar (≈ 102 psig) | 25 hp | Worldwide |
| Quincy QGSV-25 | 125.1 cfm | 100 psig (≈ 6.9 bar) | 25 hp | North America |
| Kaeser SFC 18S | 126.1 cfm | 110 psig (≈ 7.6 bar) | n/a | North America |
| Atlas Copco GA 15 VSD+ | 12.2 to 104.7 cfm | 102 psig (≈ 7 bar) | 20 hp | Worldwide |
| ELGi EG 15 PM | 17 to 93 cfm | 7 bar (≈ 102 psig) | 20 hp | Worldwide |
| ABAC Formula I 18 PM | ≈ 19.3 to 117.8 cfm | 7 bar (≈ 102 psig) | 25 hp | Europe / international |
| Mark MSM 18 IVR | ≈ 19.3 to 117.8 cfm | 7 bar (≈ 102 psig) | 25 hp | Europe / international |
| FINI PLUS 22-08 VS | 48 to 118 cfm | 8 bar (≈ 116 psig) | 30 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other S-energy 25-40 hp models
Is your product missing?
Request received. We will proceed within 72 hours.