Lubricated rotary screw compressor
Kaeser ESD 250
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 1,278 cfm125 psig (≈ 8.6 bar)
- Power
- n/a
- Type
- Fixed speed
- Manufacturer
- Kaeser
- Line
- ESD
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- 460/575 V (series)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 1,278 cfm | ≈ 36.19 m³/min |
| 175 psig (≈ 12.1 bar) | 1,055 cfm | ≈ 29.87 m³/min |
| 217 psig (≈ 15 bar) | 842 cfm | ≈ 23.84 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Gardner Denver L290 | 1,262 acfm | 145 psig (≈ 10 bar) | 390 hp | Worldwide |
| Sullivan-Palatek SP25-300 | 1,261.8 acfm | 125 psig (≈ 8.6 bar) | 300 hp | North America |
| Sullair LS190 | 1,240 cfm | 125 psig (≈ 8.6 bar) | 250 hp | North America |
| ELGi EG 250 | 1,320 cfm | 9.5 bar (≈ 138 psig) | 300 hp | Worldwide |
| Atlas Copco GA 200 Xtreme | 1,197.1 cfm | 8.5 bar (≈ 123 psig) | 268 hp | Worldwide |
| ALUP LARGO 250 | 1,324 cfm | 10 bar (≈ 145 psig) | 340 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other ESD models
Is your product missing?
Request received. We will proceed within 72 hours.