Lubricated rotary screw compressor
Kaeser CSD 145
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 548 cfm125 psig (≈ 8.6 bar)
- Power
- n/a
- Type
- Fixed speed
- Manufacturer
- Kaeser
- Line
- CSD
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- 460/575 V (series)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 548 cfm | ≈ 15.52 m³/min |
| 175 psig (≈ 12.1 bar) | 449 cfm | ≈ 12.71 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Chicago Pneumatic CPI120 | 530 cfm | 9.5 bar (≈ 138 psig) | 120 hp | North America |
| ELGi EG 90SP | 525 cfm | 10 bar (≈ 145 psig) | 125 hp | Worldwide |
| Atlas Copco GA 90+ | 574 cfm | 125 psig (≈ 8.6 bar) | 125 hp | Worldwide |
| Gardner Denver L90 | 579.3 acfm | 130 psig (≈ 9 bar) | 125 hp | Worldwide |
| Hertz Kompressoren HSC 75 | ≈ 419.2 cfm | 8.5 bar (≈ 123 psig) | 100 hp | Worldwide |
| Quincy QGS-100 | 414.6 cfm | 125 psig (≈ 8.6 bar) | 100 hp | North America |
| Sullair LS90 (CE) | ≈ 540.3 cfm | 10 bar (≈ 145 psig) | ≈ 121 hp | Europe / international |
| ALUP LARGO 110 | ≈ 561.5 cfm | 10 bar (≈ 145 psig) | 150 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CSD models
Is your product missing?
Request received. We will proceed within 72 hours.