Lubricated rotary screw compressor
Kaeser CSD 110
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 382 cfm125 psig (≈ 8.6 bar)
- Power
- n/a
- Type
- Fixed speed
- Manufacturer
- Kaeser
- Line
- CSD
- Stages
- 1
- Cooling
- Air, or water depending on version
- Voltage
- 460/575 V (series)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- ASME/CRN mention (receiver/vessel)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 125 psig (≈ 8.6 bar) | 382 cfm | ≈ 10.82 m³/min |
| 175 psig (≈ 12.1 bar) | 307 cfm | ≈ 8.69 m³/min |
| 217 psig (≈ 15 bar) | 261 cfm | ≈ 7.39 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Atlas Copco GA 55+ | 381 cfm | 125 psig (≈ 8.6 bar) | 75 hp | Worldwide |
| Quincy QGS-100 | 414.6 cfm | 125 psig (≈ 8.6 bar) | 100 hp | North America |
| Hertz Kompressoren HSC 75 | ≈ 419.2 cfm | 8.5 bar (≈ 123 psig) | 100 hp | Worldwide |
| Sullair ST5509 | 341 cfm | 125 psig (≈ 8.6 bar) | 75 hp | North America |
| Chicago Pneumatic CPI100 | 424 cfm | 9.5 bar (≈ 138 psig) | 100 hp | North America |
| ELGi EG 55 | 328 cfm | 9.5 bar (≈ 138 psig) | 75 hp | Worldwide |
| FINI PLUS 75-10 | 371 cfm | 10 bar (≈ 145 psig) | 100 hp | Europe / international |
| Gardner Denver ESM55FC | ≈ 353.1 cfm | 10 bar (≈ 145 psig) | ≈ 74 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CSD models
Is your product missing?
Request received. We will proceed within 72 hours.