Lubricated rotary screw compressor
Kaeser BSD 83 T
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 288.2 cfm7.5 bar (≈ 109 psig)
- Power
- ≈ 60 hp45 kW
- Type
- Fixed speed
- Manufacturer
- Kaeser
- Line
- BSD
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- 50 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 7.5 bar (≈ 109 psig) | ≈ 288.2 cfm | ≈ 8.16 m³/min |
| 10 bar (≈ 145 psig) | ≈ 241.9 cfm | ≈ 6.85 m³/min |
| 13 bar (≈ 189 psig) | ≈ 193.2 cfm | ≈ 5.47 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 45 | 282 cfm | 8 bar (≈ 116 psig) | 60 hp | Worldwide |
| Atlas Copco GA 45+ | 295 cfm | 125 psig (≈ 8.6 bar) | 60 hp | Worldwide |
| Sullair ST4508 | 280 cfm | 115 psig (≈ 7.9 bar) | 60 hp | North America |
| Quincy QGS-60 | 262.5 cfm | 125 psig (≈ 8.6 bar) | 60 hp | North America |
| Hertz Kompressoren HSC 45 | ≈ 259.2 cfm | 7.5 bar (≈ 109 psig) | 60 hp | Worldwide |
| Chicago Pneumatic CPI75 | 352 cfm | 8 bar (≈ 116 psig) | 75 hp | North America |
| Gardner Denver ESM45x | ≈ 300.2 cfm | 7.5 bar (≈ 109 psig) | ≈ 60 hp | Europe / international |
| FINI PLUS 55-08 | 304 cfm | 7.5 bar (≈ 109 psig) | 75 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other BSD models
Is your product missing?
Request received. We will proceed within 72 hours.