Lubricated rotary screw compressor
Chicago Pneumatic CPI101
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- 530 cfm7 bar (≈ 102 psig)
- Power
- 100 hp75 kW
- Type
- Fixed speed
- Manufacturer
- Chicago Pneumatic
- Line
- CPI 75-120
- Stages
- 1
- Cooling
- Air
- Voltage
- 575 V available (others n/a)
- Frequency
- 60 Hz
- Brochure market
- North America
- CSA
- n/a
- CRN
- available (optional)
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 7 bar (≈ 102 psig) | 530 cfm | ≈ 15.01 m³/min |
| 8 bar (≈ 116 psig) | 488 cfm | ≈ 13.82 m³/min |
| 9.5 bar (≈ 138 psig) | 449 cfm | ≈ 12.71 m³/min |
| 12.5 bar (≈ 181 psig) | 389 cfm | ≈ 11.02 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ELGi EG 75 | 528 cfm | 7 bar (≈ 102 psig) | 100 hp | Worldwide |
| Atlas Copco GA 75+ | 543 cfm | 100 psig (≈ 6.9 bar) | 100 hp | Worldwide |
| Kaeser CSDX 145 | ≈ 543.8 cfm | 7.5 bar (≈ 109 psig) | ≈ 101 hp | Worldwide |
| Gardner Denver L75 | 488.1 acfm | 110 psig (≈ 7.6 bar) | 100 hp | Worldwide |
| Sullair ST7508 | 443 cfm | 115 psig (≈ 7.9 bar) | 100 hp | North America |
| Hertz Kompressoren HSC 75 | ≈ 441.4 cfm | 7.5 bar (≈ 109 psig) | 100 hp | Worldwide |
| FINI K-MAX 90-08 | 562 cfm | 7.5 bar (≈ 109 psig) | 125 hp | Europe / international |
| ABAC FORMULA M75 A 7,5 | ≈ 466.2 cfm | 7.5 bar (≈ 109 psig) | 100 hp | Europe / international |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other CPI 75-120 models
Is your product missing?
Request received. We will proceed within 72 hours.