Lubricated rotary screw compressor

Atlas Copco GA 30+

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: 214 cfm100 psig (≈ 6.9 bar)
Power: 40 hp30 kW
Type: Fixed speed
Manufacturer: Atlas Copco
Line: GA 30+-90
Stages: n/a
Cooling: Air
Voltage: n/a
Frequency: 50 Hz · 60 Hz
Brochure market: Worldwide
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

60 Hz

Pressure	Flow	In m³/min
100 psig (≈ 6.9 bar)	214 cfm	≈ 6.06 m³/min
125 psig (≈ 8.6 bar)	194 cfm	≈ 5.49 m³/min
150 psig (≈ 10.3 bar)	176 cfm	≈ 4.98 m³/min
175 psig (≈ 12.1 bar)	158 cfm	≈ 4.47 m³/min

50 Hz

Pressure	Flow	In m³/min
7 bar (≈ 102 psig)	210 cfm	≈ 5.95 m³/min
8 bar (≈ 116 psig)	191 cfm	≈ 5.41 m³/min
9.5 bar (≈ 138 psig)	175 cfm	≈ 4.96 m³/min
12.5 bar (≈ 181 psig)	151 cfm	≈ 4.28 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Sullair ST3708	219 cfm	115 psig (≈ 7.9 bar)	50 hp	North America
ELGi EG 30	206 cfm	7 bar (≈ 102 psig)	40 hp	Worldwide
Kaeser BSD 65	≈ 199.5 cfm	7.5 bar (≈ 109 psig)	≈ 40 hp	Worldwide
Hertz Kompressoren HSC 37	≈ 229.5 cfm	7.5 bar (≈ 109 psig)	50 hp	Worldwide
Gardner Denver L30	196.9 acfm	110 psig (≈ 7.6 bar)	40 hp	Worldwide
FINI PLUS 38-08	212 cfm	7.5 bar (≈ 109 psig)	50 hp	Europe / international
Chicago Pneumatic CPD 40 G	198 cfm	0.7 MPa (≈ 102 psig)	40 hp	Europe / international
ABAC FORMULA M37 7,5	≈ 233.1 cfm	7.5 bar (≈ 109 psig)	50 hp	Europe / international

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other GA 30+-90 models

Is your product missing?