Lubricated rotary screw compressor
ABAC SPINN4 I 10
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 17.8 cfm10 bar (≈ 145 psig)
- Power
- 5.5 hp4 kW
- Type
- Variable speed (VSD)
- Manufacturer
- ABAC
- Stages
- 1
- Cooling
- Air
- Voltage
- 400 V 3ph
- Frequency
- 50 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 10 bar (≈ 145 psig) | ≈ 17.8 cfm | ≈ 0.5 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Published configurations
| Designation | Part no. | Configuration | Voltage |
|---|---|---|---|
| SPINN4 I 10 400/50 CE | 4152060813 | Base-mounted | 400 V 3ph |
| SPINN4 I 10 400/50 200 CE | 4152060815 | Tank-mounted 200 L | 400 V 3ph |
| SPINN4E I 10 400/50 200 CE | 4152060817 | Tank-mounted 200 L, with dryer | 400 V 3ph |
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| Quincy QGSV-5 | 17.8 cfm | 145 psig (≈ 10 bar) | 5 hp | North America |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other SPINN VS 2.2-7.5 kW models
Is your product missing?
Request received. We will proceed within 72 hours.