Lubricated rotary screw compressor

ABAC SPINN 22 10

Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.

Reference flow: ≈ 109.1 cfm10 bar (≈ 145 psig)
Power: 30 hp22 kW
Type: Fixed speed
Manufacturer: ABAC
Line: SPINN 15x-22 kW
Stages: 1
Cooling: Air
Voltage: 400 V 3ph
Frequency: 50 Hz
Brochure market: Europe / international
CSA: n/a
CRN: n/a
Source: Manufacturer’s page

Published flow by pressure

Pressure	Flow	In m³/min
10 bar (≈ 145 psig)	≈ 109.1 cfm	≈ 3.09 m³/min

Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.

Published configurations

Designation	Part no.	Configuration	Voltage
SPINN 22 10 400/50 FM CE	4152028925	Base-mounted	400 V 3ph
SPINN 22E 10 400/50 FM CE	4152028937	Base-mounted, with dryer	400 V 3ph
SPINN 22E 10 400/50 TM500 CE	4152028949	Tank-mounted 500 L, with dryer	400 V 3ph

Comparable models

Compare side by side

Model	Flow	At pressure	Power	Market
Sullair ST22 (CE)	≈ 109.5 cfm	10 bar (≈ 145 psig)	≈ 29 hp	Europe / international
FINI PLUS 22-10	106 cfm	10 bar (≈ 145 psig)	30 hp	Europe / international
Chicago Pneumatic CPM 30	105 cfm	1 MPa (≈ 145 psig)	30 hp	Europe / international
CompAir L22	≈ 113.4 cfm	10 bar (≈ 145 psig)	≈ 29 hp	Europe / international
Mark MSM 22	114 cfm	10 bar (≈ 145 psig)	30 hp	Europe / international
Kaeser ASD 40	≈ 110.5 cfm	10 bar (≈ 145 psig)	≈ 29 hp	Worldwide
Hertz Kompressoren HSC 22	≈ 107 cfm	10 bar (≈ 145 psig)	30 hp	Worldwide
Ingersoll Rand RSb18ie	104 cfm	10 bar (≈ 145 psig)	≈ 24 hp	Worldwide

Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.

Other SPINN 15x-22 kW models

Is your product missing?