Desiccant dryers · DRYPOINT XCp 80–500
BEKO DRYPOINT XCp desiccant air dryer (80–500, premium)
Heatless regenerative desiccant dryer, BEKO Technologies premium series. BEKOTOUCH touch-screen PLC controller (UL-certified) with standard humidity demand control — up to 70% purge-air saving at part load. -40 °C pressure dew point as standard (-73 °C / -100 °F optional), rated to ISO 7183 (Option A2). The displayed price is the “with mounted filters” build: 0.01-micron CLEARPOINT coalescing pre-filter + 1-micron post-filter. Extensive options (outdoor protection, dew-point monitoring, MODBUS). 80 to 500 SCFM, 3/4″ to 2″ NPT.
From $22,268 CAD, before taxes. Installation and shipping extra. The quote prevails.
- Flow
- 80–500 SCFM
- Dew point
- -40 °C (-40 °F)
- Models
- 9
Image may differ from the actual product. 9 models · 80–500 SCFM
CAD list prices, before taxes. The model from the calculator is highlighted.
9 models shown
| Model | Flow | Conn. | Cartridges | Weight | Price | |
|---|---|---|---|---|---|---|
| XCp80 | 80 SCFM | 3/4" NPT | — | 153 lb69 kg | $22,268 | |
| XCp100 | 100 SCFM | 1" NPT | — | 203 lb92 kg | $23,265 | |
| XCp120 | 120 SCFM | 1" NPT | — | 203 lb92 kg | $24,095 | |
| XCp160 | 160 SCFM | 1 1/4" NPT | — | 311 lb141 kg | $25,758 | |
| XCp200 | 200 SCFM | 1 1/4" NPT | — | 311 lb141 kg | $28,083 | |
| XCp250 | 250 SCFM | 1 1/2" NPT | — | 460 lb209 kg | $31,239 | |
| XCp300 | 300 SCFM | 1 1/2" NPT | — | 460 lb209 kg | $34,063 | |
| XCp400 | 400 SCFM | 2" NPT | — | 649 lb294 kg | $37,720 | |
| XCp500 | 500 SCFM | 2" NPT | — | 845 lb383 kg | $43,203 | |
In-line filters (included)
The matching filters are included as standard with this dryer — here is where they sit in the network (an upstream Walker X1 pre-filter remains recommended as an option for BEKO models).
- Water separatorat compressor
- X1Pre-filter (opt.)
- BEKO0.01 µm incl.
- Dryer
- BEKO1 µm incl.
- Dry, clean air
- Water separator — at the compressor — removes bulk liquid water right at the compressor outlet. A separate component from the dryer, required upstream (often already in place). View water separators →
- X1 pre-filter (Walker) — optional, upstream — stops liquid water, dust and oil aerosols; protects the included fine filter and the desiccant. Add it below.
- BEKO CLEARPOINT 0.01 µm filter — included with the dryer — fine coalescing; protects the desiccant bed from oil. Supplied by BEKO — it is not a Walker XA filter.
- BEKO 1 µm particulate post-filter — at the outlet (included) — catches carried-over desiccant fines before the network. Supplied by BEKO.
Range specifications
- Technology
- Heatless (purge-regenerated, pressure-swing adsorption)
- Dew point — standard
- -40 °C (-40 °F)
- Dew point — options
- -73 °C / -100 °F (on request)
- Operating pressure
- 4.1–10.3 barg (60–150 psig)
- Inlet temperature
- 4 °C (39 °F) → 49 °C (120 °F)
- Controller
- BEKOTOUCH touch-screen PLC controller (UL-certified) — standard humidity demand control
- Power supply
- 120–240 VAC (50–60 Hz)
- Energy management
- Standard dew-point demand control — up to 70% purge-air saving at part load
- Standard
- With mounted filters: 0.01-micron CLEARPOINT coalescing pre-filter + 1-micron particulate post-filter. BEKOMAT (zero air-loss) drain recommended.
- Recommendation
- Fit 5-micron then 1-micron pre-filters upstream (protects the 0.01-micron filter) and a BEKOMAT drain at the inlet. Monitor the dew point periodically.
- Certification (CRN)
- Pressure vessels built to the ASME code. CRN registration to be confirmed by province with BEKO / Onyx M3 before publication.
Videos
Manufacturer demos and guides (CAG Technologies YouTube channel). Videos play right here, without leaving the site — the player only loads on click.
View my quote request
Add the models you need to your request, then send it all at once from the quote page. Fast response, billing by transfer or purchase order — no online payment.
View my quote request