IoT & monitoring · ONYX kits

Configure your ONYX kit

Pick what you want to measure and describe your installation: the configurator assembles your kit, gives an approximate budget and pre-fills the quote request.

ONYX kit components: Rogowski coil (current), Acuvim power meter, pressure, flow and dew-point sensors, LTE gateway and online dashboard. — ONYX kit: current · power · pressure · flow · dew point

1. What do you want to measure? Compressor power and run status (kW · kWh) Network pressure Air flow Dew point (air quality at the dryer) Temperature (-20 to 200 °C)

2. Your installation

Number of compressors

3. Communication

Wired: Modbus RTU (RS-485) or Modbus TCP (Ethernet) · standard, included

Hard-to-wire points (wireless link) LTE cellular gateway (remote site or closed network)

Recording: only wired allows per-second sampling, required for diagnostics. Wireless records at an interval of 1 to 60 min.

4. Data hosting Local server: on your site, on your network; no data leaves the plant Cloud: managed by Onyx M3, flat-rate and included, no per-use subscription Not sure: to be determined with Onyx M3

Request a quote

Your configuration is attached to the message, adjust it freely. Fast response, billing by transfer or purchase order, no online payment.

Configure your ONYX kit

Request a quote

Quote: configured ONYX kit

Let’s talk about your compressed air system