Image may differ from the actual product. Insertion flow probes · VPInstruments · VPFlowScope Probe 400 mm · display + data logger
VPS.R150.P400.D11
Thermal mass insertion flow probe for dry compressed air: mass flow, pressure and temperature measured simultaneously. It installs under pressure on an insertion valve, without shutting the network down, and suits pipes over 2 in. Three readout versions: no display (connector cap, for a PLC or monitoring system), with display, or with display and built-in data logger, the reference version for compressed air audits, which logs on site with no computer.
$5,556 CAD list price, before taxes. Installation and shipping extra. Price subject to change without notice.
All configurations: VPFlowScope Probe Compare in the selector
Configuration specifications
- VPInstruments part number
- VPS.R150.P400.D11
- Configuration
- 400 mm · display + data logger
- Probe length
- 400 mm (15.7 in)
- Readout
- Display + data logger (D11)
- Max pressure
- 250 psig (17 barg)
- Max temperature
- 60 °C (140 °F)
Range specifications
- Brand
- VPInstruments
- Reseller
- Onyx M3 Inc.
- Technology
- Thermal mass, insertion probe installed under pressure
- Air quality
- Dry compressed air (after the dryer)
- Measurements
- Mass flow · pressure · temperature
- Accuracy
- 2% of reading (calibration conditions); in service, insertion probe accuracy depends on the installation (straight runs, dry air, position)
- Communication
- RS485 (Modbus RTU), 4-20 mA or pulse
- Power supply
- 12 to 24 VDC
- Gases measured
- Dry compressed air, nitrogen and non-condensing inert gases
Ready to request a quote?
Add this configuration and its accessories to your request, then send it all at once from the quote page. Onyx M3 validates the measuring point before ordering.