Desiccant dryer
Ultrafilter HRE 2500
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 1,471 SCFM2,500 m³/h
- Dew point
- n/a
- ISO 8573-1 class
- n/a
- Type
- Blower purge
- Manufacturer
- Ultrafilter
- Line
- ULTRA.DRY HRE
- Conditions
- Vnom ref. 20 °C/1 bar abs, 7 bar g, inlet 35 °C
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei DDH 2700 | ≈ 1,589 SCFM2,700 m³/h | -40 °C (-40 °F) | Class 2 (derived) | Europe / international |
| Altec AIR HBP-1500-4 | 1,500 SCFM≈ 2,549 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| BEKO Technologies XFe 1500 | 1,500 SCFM≈ 2,549 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Champion XCHB1500 | 1,500 SCFM2,550 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Hankison HBP1500 | 1,500 SCFM≈ 2,549 m³/h | -40 °C (-40 °F) | Class 2 | North America |
| Ingersoll Rand HB1500 | 1,500 SCFM2,550 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Kaeser KBD 1500 | 1,500 SCFM≈ 2,549 m³/h | -40 °C (-40 °F) | Class 2 (derived) | North America |
| Pneumatic Products (SPX) IBP1500 | 1,500 SCFM≈ 2,549 m³/h | -40 °C (-40 °F) | Class 2 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other ULTRA.DRY HRE models
Is your product missing?
Request received. We will proceed within 72 hours.