Desiccant dryer
Pneumatech PH 320 HE
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 318 SCFM540 m³/h
- Dew point
- -20 °C (-4 °F)As published: -20 °C/-5 °F
- ISO 8573-1 class
- Class 3 (derived)
- Type
- Heatless
- Manufacturer
- Pneumatech
- Voltage
- 230 VAC 50/60 Hz or 115 VAC 50/60 Hz
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Atlas Copco CD 150+ | 318 SCFM540 m³/h | -20 °C (-4 °F) | Class 3 | Worldwide |
| Quincy QHD-320 | 320 SCFM≈ 544 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
| Pneumatic Products (SPX) 330CDA | 328 SCFM≈ 557 m³/h | -73 °C (-99.4 °F) | Class 1 (derived) | North America |
| Hankison HHL 521 | ≈ 306 SCFM520 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Aircel AHLD-300 E | 300 SCFM≈ 510 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Altec AIR HLD-0300-1 | 300 SCFM≈ 510 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Champion XCHL300 | 300 SCFM510 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
| Chicago Pneumatic CPAD-300 | 300 SCFM≈ 510 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 (derived) | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other PH 100-625 HE (solid desiccant) models
Is your product missing?
Request received. We will proceed within 72 hours.