Desiccant dryer
Pneumatech PH 220 HE
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 222 SCFM378 m³/h
- Dew point
- -40 °C (-40 °F)As published: -40 °C/-40 °F
- ISO 8573-1 class
- Class 2 (derived)
- Type
- Heatless
- Manufacturer
- Pneumatech
- Voltage
- 230 VAC 50/60 Hz or 115 VAC 50/60 Hz
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Atlas Copco CD 105+ | 222 SCFM378 m³/h | -40 to -20 °C (-40 to -4 °F) | Class 2 to 3 | Worldwide |
| Mikropor MDA 360 | 215 SCFM360 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Quincy QMOD00215 | 215 SCFM≈ 365 m³/h | -73.3 to -40 °C (-99.9 to -40 °F) | Class 1 to 2 | North America |
| Hertz Kompressoren HDA 360 | 212 SCFM360 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Nano Purification NDL 2110N | 212 SCFM≈ 360 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | North America |
| OMI HLA 400 | 235 SCFM400 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 | Worldwide |
| Hankison HHL 351 | ≈ 206 SCFM350 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
| Ingersoll Rand D350ILA | ≈ 206 SCFM350 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Worldwide |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other PH 90-690 HE (solid desiccant) models
Is your product missing?
Request received. We will proceed within 72 hours.