Refrigerated dryer
MTA DEiT 190
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 671 SCFM1,140 m³/h
- Dew point
- 3 °C (37.4 °F)As published: ≤ 3 °C
- ISO 8573-1 class
- Class 4
- Type
- Non-cycling
- Manufacturer
- MTA
- Line
- DE iTECH
- Voltage
- 400/3/50 (460/3/60)
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Worldwide
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Mattei MD 185 | 653.2 SCFM1,110 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| BEKO Technologies DRYPOINT RX 700 | 700 SCFM≈ 1,189 m³/h | 2.8 to 7.2 °C (37 to 45 °F) | Class 4 to 5 | North America |
| Gardner Denver XGNC700 | 700 SCFM1,190 m³/h | n/a | Class 4 to 5 | North America |
| Ingersoll Rand DA1190 | 700 SCFM1,190 m³/h | n/a | Class 4 | North America |
| Sullair SRN-700 | 700 SCFM≈ 1,189 m³/h | 2.8 to 7.2 °C (37 to 45 °F) | Class 4 to 5 | North America |
| Atlas Copco FX 300 | 636 SCFM1,080 m³/h | 3 °C (37.4 °F) | Class 4 (derived) | Worldwide |
| Worthington Creyssensac DW 108 | 636 SCFM1,080 m³/h | 4 °C (39.2 °F) | Class 4 | Worldwide |
| Altec AIR RAD-0600A | 600 SCFM≈ 1,019 m³/h | n/a | Class 4 to 5 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other DE iTECH models
Is your product missing?
Request received. We will proceed within 72 hours.