Desiccant dryer
ALUP AD 940
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Flow
- ≈ 551 SCFM936 m³/h
- Dew point
- -70 to -20 °C (-94 to -4 °F)As published: -20 / -40 °C std (-70 °C optional AD125+)
- ISO 8573-1 class
- Classes 1, 2, 3 (derived)
- Type
- Heatless
- Manufacturer
- ALUP
- Line
- AD 90-940
- Conditions
- 7 bar, PDP -40 °C
- Voltage
- 115-230 VAC
- Frequency
- 50 Hz · 60 Hz
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Comparable models
Compare side by side| Model | Flow | Dew point | ISO class | Market |
|---|---|---|---|---|
| Worthington Creyssensac DB 940 | ≈ 551 SCFM936 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| MARK ADS 156 | 551 SCFM936 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| Mattei DD 3130 | 560 SCFM954 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| FINI HDT 160 | 572 SCFM972 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 2, 3 (derived) | Europe / international |
| CompAir AX150TF | ≈ 530 SCFM900 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| BEKO Technologies AC 495 | ≈ 589 SCFM1,000 m³/h | -70 to -40 °C (-94 to -40 °F) | Class 1 to 2 (derived) | Europe / international |
| Ultrafilter HL 1000 | ≈ 589 SCFM1,000 m³/h | -70 to -20 °C (-94 to -4 °F) | Classes 1, 3 (derived) | Europe / international |
| Altec AIR HLD-0550-1 | 550 SCFM≈ 934 m³/h | -73 °C (-99.4 °F) | Class 1 | North America |
Same type, flow within ±25%, equal or better ISO class. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other AD 90-940 models
Is your product missing?
Request received. We will proceed within 72 hours.