Lubricated rotary screw compressor
Mark MSM 22 IVR
Under construction. This comparison tool is still being built: do not base a purchasing decision on this data. Always confirm with your local distributors.
- Reference flow
- ≈ 22.2 to 135.2 cfm7 bar (≈ 102 psig)
- Power
- 30 hp22 kW
- Type
- Variable speed (VSD)
- Manufacturer
- Mark
- Stages
- 1
- Cooling
- Air
- Voltage
- n/a
- Frequency
- n/a
- Brochure market
- Europe / international
- CSA
- n/a
- CRN
- n/a
- Source
- Manufacturer’s page
Published flow by pressure
| Pressure | Flow | In m³/min |
|---|---|---|
| 7 bar (≈ 102 psig) | ≈ 22.2 to 135.2 cfm | ≈ 0.63 to 3.83 m³/min |
| 9.5 bar (≈ 138 psig) | ≈ 114.7 cfm | ≈ 3.25 m³/min |
Values published by the manufacturer, at its reference conditions; no interpolation. “≈” = converted from another published unit.
Comparable models
Compare side by side| Model | Flow | At pressure | Power | Market |
|---|---|---|---|---|
| ABAC Formula I 22 PM | ≈ 22.2 to 135.2 cfm | 7 bar (≈ 102 psig) | 30 hp | Europe / international |
| FINI K-MAX 22-08 VS PM | 20 to 134 cfm | 8 bar (≈ 116 psig) | 30 hp | Europe / international |
| CompAir L22RS | ≈ 36.7 to 125 cfm | 7.5 bar (≈ 109 psig) | ≈ 29 hp | Europe / international |
| Sullair 2200V (50 Hz) | 134 cfm | 100 psig (≈ 6.9 bar) | 30 hp | North America |
| Atlas Copco GA 18 VSD+ | 12.2 to 138.1 cfm | 102 psig (≈ 7 bar) | 25 hp | Worldwide |
| Quincy QGSV-30 | 139.9 cfm | 100 psig (≈ 6.9 bar) | 30 hp | North America |
| ELGi EG 18 PM | 30 to 140 cfm | 7 bar (≈ 102 psig) | 25 hp | Worldwide |
| Kaeser SFC 18 | 140 cfm | 110 psig (≈ 7.6 bar) | n/a | North America |
Same type, flow within ±25% at the same pressure. The closest model from each manufacturer. Flows at each manufacturer’s conditions, no ranking.
Other MSM 16-22 IVR (PM) models
Is your product missing?
Request received. We will proceed within 72 hours.