Industrial telemetry

Your equipment operates in remote areas.
Your data stays scattered.

Consolidation of the data your machines and platforms already produce, into a single dashboard, including on sites without cellular coverage.

Measurement · Diagnostics · Energy optimization

In partnership with

The situation

Multiple systems.
No overall picture.

Typical situation

Several platforms with no interconnection
A separate login for each equipment brand
Manual compilation of hours and utilization
Failures noticed only after the machine is down

With consolidation

A single dashboard for the entire fleet
Every brand on one interface
Hours, utilization and location tracked continuously
Automatic alerts on thresholds and anomalies

What you see

The entire fleet, on one screen

Each machine, its status, hours, consumption and idle share, regardless of brand or site.

From measurements to indicators

An amperage reading interests no one.
An hourly cost does.

Dashboard: system summary and calculated indicators

Hourly cost: power × rate

Specific power: kW ÷ output

Load factor: output ÷ engine hours

Deviations from targets: flagged automatically

What measurement reveals

Waste, quantified

Idle time converted into litres, machine by machine. The ranking shows where to act first.

In the field · diagnostic campaign

Temporary deployment, no permanent modification

Measurement kit — The kit brought to site: modules, sensors and current clamps.

Installation in a mechanical room — Temporary deployment.

Measurement validated live — Real-time measurements to support informed diagnostics.

No connection to your network: dedicated satellite or cellular link

Read-only: no equipment settings are modified

Data hosted in Québec, isolated per client

Complete removal at the end of the engagement

Continuous monitoring

Or integrated long term, in your existing panels

Labelled pressure sensors — Permanent sensors, labelled and listed in the measurement plan.

DIN-rail acquisition module — DIN-rail modules, integrated into your control enclosures.

Communication gateway: cULus-certified components.

Installed by your electrician: we supply the components and connection details

No added enclosure: integrated into the gear already in place

Continuous measurement: beyond the diagnostic campaign

Progressive expansion: points added as needs grow

Solution components

Certified industrial equipment

1Field acquisition

Input modules, Modbus gateways and power meters

2Transmission

Satellite or cellular link, data collected and timestamped at the source

3Hosting and access

Client data hosted in Québec, dashboards and access management

Every active component carries a cULus or CSA certification obtained by its manufacturer.

Business model

Monthly rental, no capital investment

All included

Monthly plan

Equipment supplied, installed on site by the customer, assisted by Onyx M3
Satellite or cellular connectivity
Hosting in Québec and dashboards
Support and updates
Measurement points added during the contract

Terms

Scope of the engagement

Minimum six-month commitment
Pricing based on the number of measurement points
Assessment visit and assistance during installation
Complete removal of the equipment at the end of the contract

Limited lifetime warranty

Any defective equipment is replaced at no charge for the entire duration of the contract, server included. No unexpected expense on your side. Warranty applicable subject to compliance with the conditions set out in the contract.

How to get started

Three steps, no initial commitment

1

Fleet assessment Inventory of your equipment: what is already accessible, what needs a sensor, what cannot be measured. With the costs.

2

Pilot project One site, a few machines. The dashboard is validated on your equipment before any expansion.

3

Deployment Progressive rollout on your schedule, without disrupting the systems in place.

No system is proposed before establishing what your fleet can actually deliver.

Frederik Lavoie · Onyx M3
Phone · email · onyxm3.com

A partnership between Onyx M3 and ConsulTLP: click a logo to reach us

Your equipment operates in remote areas.Your data stays scattered.

Multiple systems.No overall picture.